Tile adhesive Wins Pro

THE WORLD OF CONSTRUCTION CHEMICALS >>HOME >>PRODUCTS WINS PRO ALFILL WINS PRO Fiber Reinforced Waterproofing Material Best Insulation Against Water; UV Resistant Wins PRO! Wins Pro is a water-based, ready-to-use, elastic, white colored waterproofing material that can be easily applied to vertical and horizontal surfaces, its resistant to UV rays, is more durable and has a higher performance. Thanks to its superior waterproofing and 300% elastic structure, it is used on the exterior of buildings and on wooden covered roofs and terraces, helping to extend the life of the building. It also saves you time by being easy to apply. Package: 20Kg Usage areas: Alfill Wins Pro can be used on many indoor and outdoor vertical and horizontal surfaces. It can also be used on surfaces exposed to humidity and direct UV rays such as roofs, terraces, pools, and balconies. It can also be applied on many different building materials such as concrete, plaster, brick, zinc, briquette. Structure Semi-fluid liquid White Elongation at break 200% Adhesion to concrete ≥ 1.40 N/mm2 tensile strength ≥ 1.20 N/mm2 crack bridging ≥ 3mm Consumption: Before applying Alfill Wins, the surface to be applied must be free of moisture. Wins should be applied to dry and clean surfaces and the surfaces to be on applied should be free of all kinds of oil, dirt and dust. Depending on the condition of the surface, Wins can be diluted with 100% water. After this thinning, one coat of primer should be applied and two coats should be used without thinning. It should not be applied in rainy or snowy weather. It should be protected from external effects and weather conditions for at least 24 hours on the applied surfaces. Attention: In order for the Alfill Wins Pro to perform fully, the applied surface must be protected with screed, ceramic and similar coatings. Also, it should not be applied in very hot weather, under direct sun, in weather with strong wind, fog, high relative humidity or rain expectation. Product storage conditions should be observed. Products should not be stored in hot and humid environments. It should not be applied to unset surfaces. Protective gloves, goggles and clothing should be used while applying. Eye and skin contact should be avoided. In case of skin contact, wash with plenty of water and soap. In case of eye contact, rinse with plenty of water and seek medical advice immediately. Keep out of reach of children. Do not swallow, do not use empty packages to store drinking water. Packaging and Shelf Life: It can be stored for 12 months in a dry and cool environment, in its unopened package, between +5°C and +35°C. It should be protected from sun and frost. Improper storage conditions or exceeding the period of use may deteriorate the qualities of the product