Universal Plaster

WORLD OF CONSTRUCTION CHEMICALS >> HOMEPAGE >>PRODUCTS UNIVERSAL PLASTER ALFILL UNIVERSAL PLASTER Fiber Added Multi-Purpose Cement Based Plaster Mortar Universal Plaster, which provides strong adhesion, is applied quickly and easily. Universal Plaster, which is resistant to crack formation, is minimally affected by weather conditions thanks to its water vapor permeability. Package: 25Kg Areas of Use: It is a plaster that can be applied to walls and ceilings, indoors and outdoors. It can be used as a topcoat plaster or as a sub-plaster for decorative applications (such as satin plaster, tiles, decorative stone, BTB, garden walls and ceramic under-plaster). Appearance Gray or white colored powder Powder Density 1.55 kg/lt Water Mixing Ratio 5 – 6 lt water / 25 kg powder Resting Period 5 – 10 minutes Pot Life About 2 hours Application Temperature Between +5°C and +35°C Dry Film Thickness > 400μm (E5) (EN 1062-1) Grain Size Thick; < 1500μm (S3)(EN 1062-1) Water Transfer Rate Low; ≤ 0.1 kg/(m². h0.5)(W3)(EN 1062-1) Flexural Strength > 4 N/mm² (EN 196-1) Compressive Strength > 10 N/mm² (EN 12190) Service Temperature -20°C / +70°C Consumption: 1 – 2.5 kg/m² (Varies depending on the application method) Attention: Avoid application at temperatures below 5°C and above +35°C. Avoid application in areas that are frozen, at risk of freezing within 24 hours, or exposed to direct sun and wind. After application, make sure that there is no snowfall or severe cold until the cement sets (approximately 1 week). Never add powder or water to expired mortar. Be careful not to use sheets that have lost their properties by being exposed to the sun for a long time. Packaging and Shelf Life: In 25 kg craft bags. It can be stored for 12 months in moisture-free environments and in its unopened packaging on a pallet with a 10-layer stack