Code NV42-03-B20260929C-0274

KM 10S

Name: KM 10S
SKU: NV42-03-B20260929C-0274

Input Supply Voltage 20VAC±10% Maximum Power Consumption 10W (Control Circuit) + Motor Power Supply Protection Fuse Protected (8A) Language Options Turkish, English and Greek Standard Interface 2 Lines 16 Character LCD Display 4-Button Set with Voice Alarm Buzzer Dimensions (mm) 116 x 160 x 50 (Width x Length x Height) Other 1 Programmable Input Integrated Keypad Detailed Setting and Status Monitoring Possibility with LCD display KM 10S System Usage Advantages Full Control Motor Control KM-10 door control card provides full control of the motor with its 4 zone motor control and dual channel high resolution encoder input as hardware. Door Movements Rapid and Smooth. With its advanced software, it allows rapid but jerk-free movements in door movements with its S smoothing on travel ramps and algorithm that does not require a limit switch. Automatic Door Status Detection: No Need for Limit Switch. There is no need for a limit switch for the door operator to operate. Door width, door open-close positions are automatically detected. Power Outage Battery and DC Supply It can operate with 2 12V battery support or external 24VDC supply in case of power outage. Battery Control Card Support Batteries are charged by the card. After emergency door opening with battery support, the card goes to sleep, preventing the batteries from being completely discharged. Doors Closed Up to the Floor Level Battery Powered Bringing to the Floor System If the elevator is not in the door opening zone with the floor signal, the doors are kept closed up to the floor level in the battery powered bringing to the floor systems. Possible Door Jam. Possible Door Jam. In the event of a door jam, reverse opening is made with an audible warning. Passengers and the door are prevented from being damaged by passing through the area where jam is detected at a slow speed. Menu Access Authorization Access to the menu is authorized for security, necessary needs and ease of adjustment. Different authorizations have been assigned to access the menu: manufacturer level, basic level and limited level. Application Flexibility Wide Parameter Opportunity. Parameters that provide application flexibility for manufacturers such as engine reduction ratio, engine speed, drive pulley circumference, spoon opening zone can be entered. Can be adjusted according to need Door Operation Tracking Counter Support Door operation can be monitored with the opening/closing counter Other Features Other Features Motor Type 24V DC Motor with Gearbox Motor Output Power Max. 200W (8A) Motor Control Type 4 Zone Control Motor Protection Overload and Short Circuit Protection Encoder Type 2 Channel Incremental Encoder (Cannot be operated with a single channel encoder) Encoder Voltage 5 VDC Resolution Any Model Between 100-2048 pulses Battery Supply and Charging 2 Pieces 12V/1.2Ah Battery / Internal Charging Available Battery Protection Fuse Protection (5A) Door Width and Speed 50 cm - 300 cm / Max. 50 cm/s Door fully open / fully closed Door jam or Photocell active output 3A, 250VAC or 30VDC relay contact output. Door opening and closing signal Slow signal / Fast signal Photocell signal Ground signal active with 24VDC Suitable for use in fire elevator doors. (High speed signal input can be detected)