Code TS261009-C743B74A7C11D5A0F9FE

AlfoTherm

Name: AlfoTherm
SKU: TS261009-C743B74A7C11D5A0F9FE

WORLD OF CONSTRUCTION CHEMICALS >> HOMEPAGE >>PRODUCTS ALFOTHERM ALFILL ALFOTHERM Cement Based Thermal Insulation Plaster Mortar 3 different insulations in one hero; Alfotherm. Cement-based interior and exterior plaster alfotherm strengthens your building in heat, sound and fire insulation. It helps reduce heating and cooling costs. It is minimally affected by weather conditions and contributes to extending the life of your buildings thanks to its breathable structure. Package: 20Kg Areas of Use: It is used directly on the facade surfaces of interior and exterior spaces, on columns and beams, on rough and fine plaster, brick, pumice and aerated concrete. Exposed concrete and smooth surfaces are roughened with “ALFILL BETONPRIMER”. It gives best results as an intermediate layer material and can also be used as a final coat of plaster when necessary. Appearance Gray or white colored powder Powder Density 328 kg/m³ Water Mixing Ratio 15-20 liters of water / 20 kg of powder Resting Period 5 – 10 minutes Pot Life About 2 hours Application Temperature Between +5°C and +35°C Compressive Strength > 0.4 N/mm² (EN 12190) Bond Strength > 0.1 N/mm² Thermal Conductivity Coefficient 0.069 kcal/m. h. °C Water Vapor Permeability ≤ 15 Capillary Water Absorption Amount ≤ 0.40kg/m. min 0.5 Fire Class A1-Fireproof Service Temperature -20°C / +70°C Consumption: 3.5 – 4 kg/m² (For 1 cm thick application on a flat surface) Attention: Avoid application at temperatures below +5°C and above +35°C. Avoid application in areas that are frozen, at risk of freezing within 24 hours, or exposed to direct sun and wind. After application, make sure that there is no snowfall or severe cold until the cement sets (approximately 1 week). Never add powder or water to expired mortar. Packaging and Shelf Life: In 20 kg craft bags. It can be stored for 6 months in moisture-free environments and in its unopened packaging on a pallet with 8 layers of stacks